Polyester Fiber Ball

Polyester Fiber Ball

The polyester fiber ball is usually used to remove impurities from the swimming pool.

The adsorption capacity of oil and organiccompounds on the surface of high-efficiency modified fiber ball was enhancedafter modification. A new type of binding method of modified fiber ball, theporosity of filter layer decreases gradually along the direction of water flowduring operation, forming a relatively ideal pore distribution state on thefilter material with large size and small size, and better filtering effect.


Pour acertain amount of pool filter fiber ball into below machine. The machine willpump out the water in the swimming pool, filter out the impurities and put themback into the swimming pool.

This machine was originally filtered through sand, but the filter effect would be better if use fiber ball, the head loss would be small, and the fiber ball could be reused by backwashing.

700 g (1.4 lbs) fiber ball = 25 kg (50 lbs)  sand. At the same time, the filtration effect of fiber ball is obviously better than that of sand.

The specific advantages of pool filter fiberball :

1.Flexible media can be compressed and reduced easily;

2.The ideal filter layer is loose and dense;

3.Moderate specific gravity, easy backwashing and less water consumption;

4.Chemical fiber material is wear-resistant and corrosion-resistant;

5.It has strong adaptability and wide application;

6.High filtration rate without adding medicine;

7.Compact equipment, small footprint, high efficiency.

ModelPool  filter fiber ball
material100%  polyester, polypropylene or acrylic fiber
Density1.38  g/cm³
Filling  density70-90  kg/m³
Filtration  speed20-85  m/h
Strength4-6  g/D
Specific  surface area3000m²/m³
Sunlight  resistanceExcellent

1.   Removeimpurities from swimming pool.

2.   Itcan be used in aquarium

3.   Fitsall existing sand or glass filters

24-hour free consultation

Your message was sent.